Your shopping cart is empty!
Welcome visitor you can login or create an account.
-500x500.jpg "CoolPad 130mm")
The CoolPad is a unique lambswool and microfibre mix buffing pad with a patented design. A highly resiliant, integral air-cooling 3D structure acts as a breathing layer and combines pressure relief, thermoregulation and moisture management in one high tech composed, finished product.
The functional layer of air space results in multiple benefits and ultimate polishing results.
Key benefits of the CoolPad include:
Decrease in polishing temperature of up to 35%
Less risk of hologramming due to the lower temperature obtained
Flexibility of the pad on curved and uneven surfaces
Faster finishing of the zone being treated
Time savings due to fast cut and high performance even on delicate surfaces
Stability of the pad due to its highly resistant composition
The CoolPad is especially suitable for polishing plastic-coated heat sensitive surfaces. It can also be used on enamel and delicate wood coating, as well as aerospace and marine coated composite surfaces.
Only recommended for use in experienced hands! This is the most aggressive pad in our range. It can be used with Rotary (1200-2000 RPM) and Dual Action (3500-4000 RPM) machine polishers.
The CoolPad is available in sizes S (76mm), M (130mm), L (150mm) and XL (180mm).
Pad cut: Heavy (6/6)
Pad size: 130mm (Medium) - sold individually (not as pictured)
Use with S3 Edition Gold for fast, high speed polishing and defect removal, with S17+ High Performance Compound for moderate defects and S30+ for lighter defect removal.
Assess paintwork prior to polishing and measure removal rates during use. This pad is exceptional on dual action machine as it will remove serious defects without leaving any holograms. However, it should be used with care. Pay extra attention to panel edges and repaired areas as it can expose the colour coats. We do not recommend the CoolPad with a DA machine on freshly painted panels.
The pads can be machine or hand washed at a low temperature. After washing, apply to your polishing machine and spin to remove excess moisture, before reusing. We recommend a quick spray with SP Wonderspray prior to popping them in your machine or cleaning by hand - to aid the cleaning process.
