Scholl Concepts Clay & Clean Rubber Pad provides efficient deep cleaning and ideal preparation of paint surfaces incombination with CF02 Clay & Finish Fluid.
The best way to achieve a perfect decontamination of your surface before you start your polishing process is using the Scholl Concepts Clay & Clean Rubber Pad on a orbital machine in combination with our CF02 - Clay Fluid. Effortlessly you will remove resin, rust film, wax residues, insects, stains, overspray and other contaminations from the car paint, glass and painted plastic parts.
Without pre-treatment with the Scholl Concepts Clay & Clean Rubber Pad, coarse particles and encrustations that have been absorbed on the paint surface would loosen and scratch the paint during polishing.
1 X 150mm Pad
Before starting the claying process, wash your car. On initial use, the Clay & Clean Rubber Pad should be used for 60 seconds on glass. This will make the polymer rubber softer and remove the protective layer on the pad. Use the special Scholl Concepts CF02 Clay Fluid as the lubricant for this process. Gently work on an orbital machine across the surface. Make sure you use enough Clay Fluid to avoid drying out. Rinse the pad with water during your decontamination process. Dry your car with a microfibre cloth. Never use the Clay & Clean Rubber Pad on a dirty car or hot surface.