Your shopping cart is empty!
Welcome visitor you can login or create an account.
The Scratchshield Wash & Rinse Set contains everything you need to prevent damage when washing your car using the two-bucket wash and rinse method (see our Advice section for details). The set contains two ScratchShield 20L Buckets, Red and Blue ScratchShield Bucket Filters and Red and Blue colour-coded Bucket Seat Lids.
Use your Blue colour-coded Bucket for washing and the Red one for Rinsing.
The ScratchShield Bucket Filter System creates a protective barrier in the bottom of your car wash bucket to prevent you picking up dirt and debris as you wash your vehicle, reducing your chances of scratching and damaging paintwork. The quality ScratchShield Bucket Filter System grit guard can be adjusted to ensure a good and stable fit into your bucket, reducing the chances of it tipping over. Its swirl pattern and legs act as “baffle plates” to reduce the chance of creating a “vortex” and moving the trapped dirt and debris above the shield.
The ScratchShield comes with a Lifetime Guarantee and, along with the Scratchshield Bucket Seat Lid, is manufactured in the UK.
Fits buckets from diameter 238mm measured 65mm up from the base.
Place the ScratchShield in the CENTRE of your bucket upside down, with the leg location pins facing upwards. Next, position the legs 1, 2, 3 & 4 CLOCKWISE to touch your bucket sides. Do not press firmly until you have a good fit.
Helps prevent scratches by creating a protective shield within your bucket and eliminating dirt, grit and debris from being transferred back onto your sponge or mitt.
Keeps your water cleaner using the combination of the spiral pattern in the ScratchShield and the raised legs to reduce dirt, grit and debris from re-circulating above the ScratchShield.
Creates a defence barrier: use your sponge or wash mitt to agitate against the surface of the shield to free it from contamination.
Fits most buckets*, so you can use your existing bucket.
1. Always keep the ScratchShield central.
2. To make any fine adjustments, the legs can be repositioned clockwise/anti-clockwise in another set of location pins, but always keep the legs in a clockwise order.
3. When you are happy with the position of the legs, turn over the ScratchShield and press down on the top to lock the legs into place.
